FIN1104MTCX Overview

Packaged in 24-TSSOP (0.173, 4.40mm Width), power buffer can be easily transported.Package number Tape & Reel (TR) is ready for power buffer.A universal mount that's easy to adapt.Typical Buffer, ReDriver type.To operate this op amp buffer, it requires a voltage of 3V~3.6V volts.LVDS, LVPECL input can be accommodated.To make sure that the cooling system does not malfunction, you should set the operating temperature to -40°C~85°C.In addition to LVDS, this operational amplifier buffer may also be used for other applications.You can get more pin-to-pin solutions for your specific needs by searching with "FIN1104".On the op amp buffer, you can find 24 terminals.As long as the splitter is supplied with 3.3V voltage, it can perform a wide range of demanding tasks.In addition, it has 24 pins.A Surface Mount hole allows it to be mounted on a PCB or other board.In the industry, other Line Driver or Receivers like the power buffer play an important role.A voltage of 41mA is required to operate this power buffer.It is necessary to supply voltage 3.3V for normal operation.Using 4-Bits as the receiver, it transmits data.For normal use of the splitter, the nominal supply current should be 11mA.4 elements are used to interface with this repeater signal.

FIN1104MTCX Features

Mainly used in LVDS.
A standard Line Driver or Receivers.
4-Bit receiver.

FIN1104MTCX Applications

There are a lot of ON Semiconductor FIN1104MTCX Signal Buffers, Repeaters, Splitters applications.

• Test Equipment
• Industrial PCs
• Protection Switching
• Cable Repeaters
• Clock Distribution
• Communications Switchers
• Network Switches/Routers
• Loopback
• Add/Drop Muxes
• Servers