As a clock IC, it is packaged by the Tape & Reel (TR) method. The 16-SSOP (0.209, 5.30mm Width) package embeds this Clock PLL. As you can see, it consists of 16 terminations. Basically, this time clock generator needs a voltage of 3.3V. There is a Clock PLL called Crystal which is designed to be the input to this clock generator. A Surface Mount-shaped electrical component makes it convenient to mount on a panel. There should be 3V~3.6V provided with this RF synthesizer. As determined by the test statistics, the ambient temperature should be set to 0°C~70°C. In this case, we are dealing with a frequency synthesizer that can be used with CMOS, PECL logic levels. As far as this electronic part is concerned, it can be classified as a PLL Clock Generator component. Microprocessor-specific clock PLL with 16 bits. The related electronic parts of part number FS7140 are listed below. There are 16 pins that are available on the frequency generator. Time clock generator can handle a voltage of 3.3V as the supply voltage. The clock PLL is generally classified as a Clock Generators device. High efficiency is achieved when operating at a frequency of 400MHz. I have designed a clock PLL with 1 elements and low jitter performance.
FS7140-02G-XTP Features
Available in the 16-SSOP (0.209, 5.30mm Width) Supply voltage of 3.3V Operating supply voltage of 3.3V
FS7140-02G-XTP Applications
There are a lot of ON Semiconductor FS7140-02G-XTP Clock Generators applications.