55ns, 30ns SPDT 360mOhm Typ DUAL Analog Switches BREAK-BEFORE-MAKE FSA5157 10nA 2.3V 6-TSSOP, SC-88, SOT-363
SOT-23
FSA5157P6X Datasheet
non-compliant
In-Stock: 0 items
Specifications
Name
Value
Type
Parameter
Factory Lead Time
6 Weeks
Lifecycle Status
ACTIVE (Last Updated: 3 days ago)
Contact Plating
Tin
Mount
Surface Mount
Mounting Type
Surface Mount
Package / Case
6-TSSOP, SC-88, SOT-363
Number of Pins
6
Weight
28mg
Operating Temperature
-40°C~85°C TA
Packaging
Tape & Reel (TR)
Published
2008
JESD-609 Code
e3
Pbfree Code
yes
Part Status
Active
Moisture Sensitivity Level (MSL)
1 (Unlimited)
Number of Terminations
6
ECCN Code
EAR99
Resistance
2.5Ohm
Subcategory
Multiplexer or Switches
Max Power Dissipation
180mW
Technology
CMOS
Terminal Position
DUAL
Terminal Form
GULL WING
Peak Reflow Temperature (Cel)
NOT SPECIFIED
Number of Functions
1
Supply Voltage
2.3V
[email protected] Reflow Temperature-Max (s)
NOT SPECIFIED
Base Part Number
FSA5157
Qualification Status
Not Qualified
Operating Supply Voltage
3V
Number of Channels
1
Max Supply Voltage
3.6V
Min Supply Voltage
1.65V
Nominal Supply Current
30nA
Power Dissipation
180mW
Max Supply Current
100nA
Number of Bits
2
Turn On Delay Time
70 ns
Number of Inputs
1
Supply Type
Single
Bandwidth
80MHz
Turn-Off Delay Time
40 ns
On-State Resistance (Max)
360mOhm Typ
High Level Output Current
350mA
Multiplexer/Demultiplexer Circuit
2:1
Off-state Isolation-Nom
75 dB
Current - Leakage (IS(off)) (Max)
10nA
Channel Capacitance (CS(off), CD(off))
21pF
On-state Resistance Match-Nom
0.12Ohm
Switch Circuit
SPDT
Switch Time (Ton, Toff) (Max)
55ns, 30ns
Charge Injection
6pC
Channel-to-Channel Matching (ΔRon)
40m Ω
Crosstalk
-75dB @ 100kHz
Switching
BREAK-BEFORE-MAKE
Voltage - Supply, Single (V+)
1.65V~4.3V
Drain to Source Resistance
400mOhm
Height
1mm
Length
2mm
Width
1.25mm
REACH SVHC
No SVHC
RoHS Status
ROHS3 Compliant
Lead Free
Lead Free
Pricing & Ordering
Quantity
Unit Price
Ext. Price
3,000
$0.20150
$0.6045
6,000
$0.18850
$1.131
15,000
$0.17550
$2.6325
30,000
$0.16640
$4.992
FSA5157P6X Product Details
FSA5157P6X Overview
The electronic component is convenient to ship overseas because it is packed in a 6-TSSOP, SC-88, SOT-363. This packaging method provides high reliability because it uses advanced packaging techniques. In Surface Mount, this analog switch is mounted. Multiplexers and demultiplexers have a ratio of 2:1. Around -40°C~85°C TA is the extended operating temperature. Total terminations are 6. A 1 channel electronic part produces high-quality output. Turning on and running the electrical part should be easy with a 2.3V voltage supply. Unlike digital switches, these are based on SPDT switching circuits. Look for analog switch ic variants by searching with FSA5157. An switch multiplexer with 2.5Ohm internal resistance has a value of 2.5Ohm. For details about the functions of 6 pins, please refer to the datasheets. The analogue multiplexer in this example is a typical Multiplexer or Switches. Users shouldn't supply more than 3.6V voltage to the switch device. Analogue multiplexers of the Single supply type that are cost-effective. It is recommended to use 1.65V as the lowest voltage for the electrical part. The voltage required by this switch device is 1.65V~4.3V, draining from a single voltage supply. The analogue multiplexer may be damaged if voltage is greater than 100nA. Operating voltages of 3V are compatible with the electrical part. In order to operate the 1 inputs, there are several steps to follow. This switch operates within the bandwidth of 80MHz. The Drain to Source resistance of this electronic component is 400mOhm. 2-bit operation is possible.