KA334 Overview
A 8-DIP (0.300, 7.62mm) case is used to package the op amp. General Purpose-type instrumentation amplifiers are used in this application. The case in which buffer amplifier is delivered is called a Tube case. There are 8 pins on this chip. In terms of the input offset voltage, instrumentation amplifier rates at 60mV. It is recommended that this electronic component be mounted using the Through Hole mounting type. In terms of operating temperature, this instrumentation amplifier performs well at a temperature of about -25°C~85°C . An 8mA volt supply current is needed for this linear amplifier to operate. There should be no change in the voltage gain. On this instrumentation amplifier, there are 2 circuits that are connected together. There are 2 channels on the operational amplifiers. In order for op amp to function properly, the temperature should not be lower than -25°C degrees Celsius. Instrumentation amplifier should only be used at temperatures up to 85°C. There are a total of 2 elements in this linear amplifier. The operating supply voltage of the buffer op amp is rated at 15V. As a recommendation, this electronic component should be used with a power supply that can deliver 8mA. I would like to point out that this electrical component is capable of working from a voltage below 28V as far as the power supply is concerned. As a general rule, it is advisable to keep the op amp's supply voltage above 4V at all times. The dual supply voltage of 14V should be used for the conduct of this electronic component.
KA334 Features
75dB voltage gain
KA334 Applications
There are a lot of ON Semiconductor
KA334 Instrumentational OP Amps applications.
- Addition operation circuits
- Subtraction operation circuits
- single/dual op amp sum and difference circuits
- Integrator circuits
- Differentiator circuits
- Logarithmic operation circuits
- Exponential operation circuits
- Multiplication circuits
- Division circuits
- Precision measurement
