LB1843V-MPB-E Overview

In order to package H bridge, Tape & Box (TB) is used.H bridge is included in the 20-LSSOP (0.173, 4.40mm Width) package as a cost-saving measure.Based on the supply voltage of 3V~9V, improved reliabilbridge drivery can be ensured.H bridge circuit is put into place in the way of Surface Mount.Motor driver H bridge is possible for -20°C~80°C TA to operate normally at motor driver H bridges operating temperature.There are lots of uses for H bridge motor driver, including DC Motors, General Purpose.On the PCB H gate is mounted using Surface Mount.To terminate a transmission line with the H bridge whose characteristic impedance matches the line, 20 terminations are employed.Signal interfaces include 20 pins that serve as pronged contacts.The base H bridge ic number of LB1843 allows you to find more related H bridge ics by using that number.To operate H bridge circuit, a voltage supply of 7.2V is required.H bridge circuit contains an analog IC type BRUSH DC MOTOR CONTROLLER.The power supply pins and the output pins are conducting a current of 800mA.It is through the 20 pins that the bridge driver can perform its specific functions.The output of this Hbridge is 1.There is a supply of electricity from 7.2V to the electrical load.Also, H-bridge is capable of providing ALSO OPERATES WITH THE RANGE OF 2.2V TO 9V SUPPLY.

LB1843V-MPB-E Features

Available in 20-LSSOP (0.173, 4.40mm Width) Package / Case
Operating Temperature at the range of Surface Mount
Interface IC Type : LB1843
With ALSO OPERATES WITH THE RANGE OF 2.2V TO 9V SUPPLY Drivers

LB1843V-MPB-E Applications

There are a lot of ON Semiconductor
LB1843V-MPB-E Full Bridge Drivers, Half-Bridge Drivers applications.

• Desktop Computers
• V-Core
• Non-V-Core
• Workstations
• High-Current DC-DC Point-of-Load Converters
• Networking Microprocessor Voltage Regulators
• Telecom Microprocessor
• Voltage Regulators
• Small Form-Factor Voltage Regulator Modules
• Notebook Computers