LM2901DR2 Overview
The product is packaged in SOIC to facilitate transportation.Output type TTL is used for this comparator.This device is designed in Cut Tape (CT) case.Electronic comparator is possible to find the 14 terminals of the comparator.The component belongs to the Comparator family of electrical components.The comparator is capable of achieving many demanding tasks when supplied with 5V voltage.It's a typical General Purpose comparator.The device contains 14 pins.14 pins are present on the comparator.You may wish to search LM2901 for more solutions that address your specific needs.The comparator presents a quiescent current of 800μA volts.The PCB or other board can be mounted using the Surface Mount on it.Normally, the nominal supply current should be 2mA .The compartator could be damaged if the current supply exceeds 2mA .In order to operate the device, 5V power supplies are sufficient.A voltage gain of 100dB can be determined from the voltage formula for the part.Temperatures above 105°C are not recommended.A temperature lower than -40°C is unsuitable for the device.A comparator is designed to operate at a maximum supply voltage of 36V .The comparator is capable of operating at a minimum supply voltage of 3V .For the output to be of high quality, 4 channels must cooperate together.
LM2901DR2 Features
TTL output capability
General Purpose IC
Quiescent Current: 800μA
Voltage Gain: 100dB
LM2901DR2 Applications
There are a lot of ON Semiconductor
LM2901DR2 linear comparators applications.
- General-Purpose, Low-Voltage Applications
- Self-diagnostics
- Lithium ion battery monitoring
- Battery management and protection
- Current and voltage sensing
- Analog front end
- Power management
- Point of load regulators
- DC/DC and AC/DC power supplies
- System control and monitoring
