LM293DMR2 Overview
The product is packaged in 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) to facilitate transportation.Output type CMOS, DTL, ECL, MOS, Open-Collector, TTL is used for this comparator.This device is designed in Tape & Reel (TR) case.Electronic comparator is possible to find the 8 terminals of the comparator.The component belongs to the Comparator family of electrical components.The comparator is capable of achieving many demanding tasks when supplied with 5V voltage.It's a typical General Purpose comparator.This element consists of 2 elements in total.The device contains 8 pins.The recommended mounting type is Surface Mount .To ensure proper functioning, the operating temperature should be set to -25°C~85°C .8 pins are present on the comparator.You may wish to search LM293 for more solutions that address your specific needs.The comparator presents a quiescent current of 2.5mA volts.The PCB or other board can be mounted using the Surface Mount on it.Normally, the nominal supply current should be 1mA .The compartator could be damaged if the current supply exceeds 1mA .In order to operate the device, 5V power supplies are sufficient.A voltage gain of 106.02dB can be determined from the voltage formula for the part.
LM293DMR2 Features
CMOS, DTL, ECL, MOS, Open-Collector, TTL output capability
General Purpose IC
Employing 2 elements
Operates under -25°C~85°C
Quiescent Current: 2.5mA
Voltage Gain: 106.02dB
LM293DMR2 Applications
There are a lot of ON Semiconductor
LM293DMR2 linear comparators applications.
- General-Purpose, Low-Voltage Applications
- Self-diagnostics
- Lithium ion battery monitoring
- Battery management and protection
- Current and voltage sensing
- Analog front end
- Power management
- Point of load regulators
- DC/DC and AC/DC power supplies
- System control and monitoring
