MAX803SQ293D1T1G Overview

This voltage supervisor has a total of 3 mounting terminals that can be used for mounting. It is packaged with Tape & Reel (TR). For your reference, this IC power includes a list of 1 functions. This power managment ic consists of 1 channels, each of which can be used independently. As a reference, this IC power includes SC-70, SOT-323 functions for your convenience. With power management, you get a lot of benefits that you won't find in other Simple Reset/Power-On Reset products. Specifies a reflow peak temperature of 260 for the package during reflow. Manage ics operate at 3.3V supply voltages. IC management conducts in a 1-voltage supply. Surface Mount mounts IC management. Power Management Circuits is a subcategory of this PMIC chip. The total number of pins on this power management is 3. This power management has 3 pins. It is recommended that the minimum supply voltage (Vsup) for this IC management should not be less than 1.2V volts. There should be no more than 5.5V volts of maximum supply voltage (Vsup) in this power management. Surface Mount is the recommended mounting type. The temperature of the supervisors should be set to this range: -40°C~105°C TJ. While this power management is operating, it will output Open Drain or Open Collector as the output voltage. For this power management, there is an 800nA volt supply current. For similar manage ics search of the manufacturer, you can always refer to MAX803, the base PMIC number.

MAX803SQ293D1T1G Features

Simple Reset/Power-On Reset type
Minimum supply voltage of 1.2V
800nA operating supply current

MAX803SQ293D1T1G Applications

There are a lot of ON Semiconductor MAX803SQ293D1T1G Voltage Supervisors applications.

• Power communication system
• Network equipment
• Consumer electronics
• Display equipment
• Power distribution systems of infant care room
• Detection of phase sequence
• FPGA design
• Leakage protection
• Analog circuit
• emergency room