MAX803SQ438T1G Overview

It is mounted through 3 terminals on the power management. Power management is packaged in a Tape & Reel (TR) way. In this IC power you will find 1 functions for you to refer to. On this supervisor, there is a series of 1 channels that can be found. Please find attached SC-70, SOT-323 functions for your reference in this IC power. As with other Simple Reset/Power-On Reset products, this IC management also offers a wide range of benefits. During operation, the power ic is supplied with a voltage of 3.3V. When a supply voltage of 1 is applied to the power ic, it conducts. Power management is included in the Surface Mount mount. The power management belongs to the Power Management Circuits subcategory. The total number of pins on this power management is 3. Power managment ic pin count is 3. I should note that the minimum supply voltage (Vsup) for this IC management should be at least 1.2V, which is the minimum supply voltage that should be applied. This IC power should be powered by no more than 5.5V volts of supply voltage (Vsup). The recommended mounting type for IC management is Surface Mount. We recommend setting the supervisors to -40°C~105°C TJ degrees. The output voltage of this power managment ic during operation is Open Drain or Open Collector. As far as the supply current of the power management is concerned, it is 800nA. A similar IC managements number of the manufacturer can always be found by using MAX803, the base power ics number.

MAX803SQ438T1G Features

Simple Reset/Power-On Reset type
Minimum supply voltage of 1.2V
800nA operating supply current

MAX803SQ438T1G Applications

There are a lot of ON Semiconductor MAX803SQ438T1G Voltage Supervisors applications.

• Microcontroller system
• Insulation fault location system
• Power distribution systems of operating room
• Display equipment
• Rechargeable batteries
• Digitally controlled LDO regulators circuit
• Consumer electronics
• Solar power charger
• Military electronics
• Leakage protection