MAX809SQ120T1G Overview

As far as the mounting terminals of this voltage supervisor are concerned, it has 3 in total. It is packaged with Tape & Reel (TR). Power management is possible to find a series of 1 functions. This power management is made up of 1 channels which are available in a series format. Please refer to power management for SC-70, SOT-323 functions. As with other Simple Reset/Power-On Reset products, this IC management also offers a wide range of benefits. Packages are specified to have an average peak reflow temperature of 260. The supervisor is always powered by a 3.3V volt supply. Power ics operate at 1 supply voltages. The mount is provided by Surface Mount. There is a subcategory called Power Management Circuits for this power management. A total of 3 pins are located on this power management. This power management system has 3 pins. Normally, the supply voltage (Vsup) for this PMIC should not be lower than 1.2V. It is recommended that the maximum supply voltage (Vsup) in this IC power be no more than 5.5V volts. Surface Mount is the recommended mounting type. You should set the supervisor's temperature during -40°C~105°C TJ . During normal operation, this power managment ic can generate Push-Pull, Totem Pole of output voltage. The power management's supply current is 800nA. A similar IC managements number of the manufacturer can always be found by using MAX809, the base power ics number.

MAX809SQ120T1G Features

Simple Reset/Power-On Reset type
Minimum supply voltage of 1.2V
800nA operating supply current

MAX809SQ120T1G Applications

There are a lot of ON Semiconductor MAX809SQ120T1G Voltage Supervisors applications.

• Satellite navigation
• Low voltage/high power - AI, GPU
• Linux and server computing
• Battery cars
• Smart meter
• Kitchen appliances
• Detection of phase sequence
• Military electronics
• Telecommunications equipment
• Display equipment