MAX809TTR Overview

As far as the mounting terminals of this voltage supervisor are concerned, it has 3 in total. A Tape & Reel (TR) package is used to package the power management. To assist you, this IC power includes 1 functions. Power management consists of 1 channels, each of which can be used independently. The purpose of this IC power is to provide you with a reference of TO-236-3, SC-59, SOT-23-3 functions. Compared to other Simple Reset/Power-On Reset products, this PMIC has a lot of benefits to offer. During the reflow process, a peak temperature of 260 is specified for the package. Manage ics operate at 3.3V supply voltages. In a 1 supply voltage, the PMIC chip conducts. Surface Mount mounts power management on the wall. There is a subcategory called Power Management Circuits for this power management. In total, IC powers are 3 pins on the board. This power management system has 3 pins. Normally, the supply voltage (Vsup) for this PMIC should not be lower than 1V. During this IC power, the maximum supply voltage (Vsup) should not exceed 5.5V volts. The mounting type of the supervisors is Surface MountThe supervisors should be set to the following temperature: -40°C~105°C TJ. As a result of this supervisor's operation, the output voltage is Push-Pull, Totem Pole. The supervisor's supply current is specified to 800nA. For similar manage ics search of the manufacturer, you can always refer to MAX809, the base PMIC number.

MAX809TTR Features

Simple Reset/Power-On Reset type
Minimum supply voltage of 1V
800nA operating supply current

MAX809TTR Applications

There are a lot of ON Semiconductor MAX809TTR Voltage Supervisors applications.

• Fire equipment power monitoring system
• Leakage protection
• Kitchen appliances
• Battery cars
• Urban rail transit weak current power monitoring
• Network equipment
• Sensitive sensors
• Detection of phase sequence
• Digitally controlled LDO regulators circuit
• Rechargeable batteries