MAX810SQ293D2T1G Overview

There are 3 mounting terminals on the voltage supervisor, each of which has a different function. In terms of packaging, power management follows the Tape & Reel (TR) model. Power management is possible to find a series of 1 functions. Power management consists of 1 channels, each of which can be used independently. There are SC-70, SOT-323 functions included in this PMIC so that you can refer to them. Several of the benefits of this PMIC are also shared by other Simple Reset/Power-On Reset products. When 3.3V is applied to the power ic, it conducts. Power ics operate at 1 supply voltages. The mount is provided by Surface Mount. There is a subcategory of this power ic known as Power Management Circuits. It has a total of 3 pins that are attached to IC management. This power management has 3 pins. It is recommended that the minimum supply voltage (Vsup) for this IC management should not be less than 1.2V volts. During this IC power, the maximum supply voltage (Vsup) should not exceed 5.5V volts. The mounting type of the supervisors is Surface MountThe temperature of the supervisors should be set to this range: -40°C~105°C TJ. Power management has an output of Push-Pull, Totem Pole during operation. There is a 800nA supply current present in the power management. If you want to search for similar IC managements of this manufacturer, you can always refer to MAX810, which is the base power ics number.

MAX810SQ293D2T1G Features

Simple Reset/Power-On Reset type
Minimum supply voltage of 1.2V
800nA operating supply current

MAX810SQ293D2T1G Applications

There are a lot of ON Semiconductor MAX810SQ293D2T1G Voltage Supervisors applications.

• Electrical fire monitoring system
• Battery cars
• Electronics installed in the vehicle
• Stable power system
• Military communications
• Consumer electronics
• Urban rail transit weak current power monitoring
• Multi-voltage system
• Sensitive sensors
• Unattended substation automation