MC100E111FNG Overview

The clock divider is packaged in a 28-LCC (J-Lead) case. Tube is the form in which it is packaged. It has 28 terminations. The supply voltage of 5V can be used to achieve high efficiency. As you can see, it is mounted by Surface Mount. A classification of Fanout Buffer (Distribution) is assigned to this electronic part. When the temperature is set to -40°C~85°C, reliable performance is ensured. This circuit clock should be able to operate on a power supply of 4.2V~5.7V volts. It's in the way of Surface Mount. It has a pin count of 28 on it. There is an output of ECL, PECL. Operation is performed using the 28 pins. The MC100E111 family contains it. There is a cut smart buffer contained in Clock Drivers that is used for this purpose. Vsup is set to 5.7V as the maximum supply voltage. In order to maintain normal operation, the supply voltage (Vsup) should be maintained above 4.2V. By default, it is set to output 9. There is a -4.5V volt supply that powers the timeing clock. In this case, the electronic part belongs to the 100E series. As a result of using this gadget, you will also be able to obtain NECL MODE: VCC = 0 V WITH VEE = -4.2 V TO -5.7 V. With a frequency of 800MHz, it is capable of maintaining excellent accuracy. A maximum input voltage of 4.12V can be applied to it.

MC100E111FNG Features

28 terminations
The operating temperature of -40°C~85°C degrees
Clock Drivers subcategory
at 800MHz frequency

MC100E111FNG Applications

There are a lot of ON Semiconductor MC100E111FNG Clock Buffers & Drivers applications.

• Mass storage system
• Navigation equipment
• Information equipment
• Tlecom applications
• Data transmission
• Network
• Consumer Electronics
• Computing
• FPGA
• High reliability telecommunication system