MC100EL32DR2G Overview

The device is packaged in the 8-SOIC (0.154, 3.90mm Width)type. This configuration uses 8terminations. By supplying 5Vwith a voltage of 5V , the device can be operated in a completely flexible manner. An interconnection of 1elements is provided by wires. All component pins are equal to 8. There is a package in the form of Tape & Reel (TR). As part of the circuit, there are 8pins that connect other components. The Surface Mountway is used to mount it. Due to the fact that it is a member of the 100ELseries, it has a wide range of applications. Logic type Divide-by-2 is adopted. Ideally, the operating temperature should be set to -40°C~85°C. This device is mounted in the Surface Mountposition. As long as the supply voltage is set to [0], the device can operate with a greater degree of reliability. Based on the Pbfree code, the result may be yes. It is important to note that NECL MODE: VCC = 0V WITH VEE = -4.2V TO -5.7Vare really important features of this electronic device. Further related parts may be found under the base part number 100EL32. From the voltage source, there is a voltage of -4.5V volts. As low as 4.2V Vsup is the minimum supply voltage. It is possible to provide a voltage up to 5.7V (Vsup). The device has a configuration of 1 data/clock inputs.

MC100EL32DR2G Features

Embedded in the 8-SOIC (0.154, 3.90mm Width) package
NECL MODE: VCC = 0V WITH VEE = -4.2V TO -5.7V

MC100EL32DR2G Applications

There are a lot of ON Semiconductor
MC100EL32DR2G Counters & Dividers applications.

• Analog multiplexing and demultiplexing
• Digital multiplexing and demultiplexing
• Signal gating
• Frequency dividing circuits
• Time delay circuits
• Communications Digital Frequency Synthesizers;
• VHF, UHF, FM, AM, etc.
• Fixed or Programmable Frequency Division
• Time Out Timer for Consumer-Application Industrial Controls
• Timing applications