MC100EP11DTR2G Overview

There is a case available for the cut smart buffer in 8-TSSOP, 8-MSOP (0.118, 3.00mm Width). There is a Tape & Reel (TR) package attached to it. It is normal to operate with a value of 3GHz. A total of 8 terminations are present in it. The supply voltage of 3.3V is capable of providing high efficiency. In this case, it is set up as Surface Mount. A classification of Fanout Buffer (Distribution) is assigned to this electronic part. It is recommended to set the temperature to -40°C~85°C in order to ensure reliable performance. In general, it should be able to work with a power source of 3V~5.5V volts. This item is positioned in the way of Surface Mount. It has a pin count of 8. As a result, it produces ECL, PECL. Operation is performed using the 8 pins. It belongs to the family MC100EP11. It is contained in Clock Drivers. In this case, the maximum supply voltage (Vsup) is set to 5.5V. As a general rule, the supply voltage (Vsup) should be maintained above 3V. The default setting of this field is to output 4. There is a voltage supply of -3.0/-5.5V volts for powering it. It belongs to the 100EP series of electronic parts. It is also possible to obtain NECL MODE: VCC=0 WITH VEE = -3.0V TO -5.5V by using this gadget. It has a maximum input voltage of 4.12V.

MC100EP11DTR2G Features

8 terminations
The operating temperature of -40°C~85°C degrees
Clock Drivers subcategory

MC100EP11DTR2G Applications

There are a lot of ON Semiconductor MC100EP11DTR2G Clock Buffers & Drivers applications.

• High-end consumer electronics
• Backplane
• 5G
• Medical instruments
• Aviation
• Wired communication field
• Other clock/data distribution
• Storage area network
• Zero crossing detector
• Line receiver and signal recovery