MC100EP14DTR2 Overview

It's a electronic part of the 20-TSSOP (0.173, 4.40mm Width) package. A Tape & Reel (TR) is used to package it. As a rule, the maximum value for normal operation is 2GHz. A total of 20 terminations can be found in it. Supply voltages of 3.3V enable high efficiency. In this case, it is set up as Surface Mount. This electronic part is classified as Fanout Buffer (Distribution), Multiplexer. If you wish to ensure reliable performance, you should set the temperature to -40°C~85°C. In general, it should be able to work with a power source of 3V~5.5V volts. Surface Mount is placed within the way of this object. 20 pins are present on timeing clock. Buffer IC is ECL, PECL that is output. It is operated using the 20 pins. It belongs to the family of MC100EP14. The circuit clock is contained in Clock Drivers. In this case, the maximum supply voltage (Vsup) is set to 5.5V. The supply voltage (Vsup) should be maintained above 3V in order for the clock divider to operate normally. A -4.5V volt supply powers it. A electronic part of this series belongs to the 100EP family. In addition, NECL MODE: VCC = 0V WITH VEE = -3V TO -5.5V can be obtained when using this gadget.

MC100EP14DTR2 Features

20 terminations
The operating temperature of -40°C~85°C degrees
Clock Drivers subcategory

MC100EP14DTR2 Applications

There are a lot of ON Semiconductor MC100EP14DTR2 Clock Buffers & Drivers applications.

• Consumer Electronics
• Fibre channel (FC)
• Navigation equipment
• Backplane
• Network attached storage
• Smartphone
• Wireless infrastructure equipment
• High speed line receiver
• Oscilloscope and logic analyzer front ends
• Industrial automation control system