MC100LVE210FNR2 Overview

As far as the case type is concerned, the cut smart buffer is available in 28-LCC (J-Lead). There is a Tape & Reel (TR) packaged with it. In normal operation, the maximum value is set to 700MHz. It has 28 terminations in it, which means that it is terminated. Supply voltages of 3.3V are capable of achieving high efficiency. In this case, it will be mounted by Surface Mount. This electronic component falls under the classification of Fanout Buffer (Distribution). If you wish to ensure reliable performance, you should set the temperature to -40°C~85°C. In general, it should be able to work with a power source of 3V~3.8V volts. Surface Mount is placed within the way of this object. It has a pin count of 28 on it. As a result, it produces ECL, PECL. During operation, 28 pins are used. This is a member of the MC100LVE210 family. A cut smart buffer of this type is contained in Clock Drivers. This value is set to 3.8V for the maximum available supply voltage (Vsup). It is recommended to keep the supply voltage (Vsup) above 3V to ensure normal operation. There is a default setting of output 18. As a result, it requires a supply voltage of -3.3V volts to run. It is a part of the 100LVE series of electrical parts. It is also possible to obtain NECL MODE: VCC = 0V WITH VEE = -3V TO -3.8V when using this gadget.

MC100LVE210FNR2 Features

28 terminations
The operating temperature of -40°C~85°C degrees
Clock Drivers subcategory

MC100LVE210FNR2 Applications

There are a lot of ON Semiconductor MC100LVE210FNR2 Clock Buffers & Drivers applications.

• Internet of Things
• Network
• Patient diagnosis
• Storage area network
• DDR4 JEDEC standard RDIMM design
• Gigabit Ethernet (GbE)
• Other clock/data distribution
• High performance communication system
• Zero crossing detector
• Data communication