MC100LVEP14DTR2 Overview

There is a case option of 20-TSSOP (0.173, 4.40mm Width) available for this clock divider. It is packaged as a Tape & Reel (TR). Normal operation is limited to 2.5GHz. A total of 20 terminations have been found in it. Supply voltages of 2.5V allow for high efficiency. The mount is made up of Surface Mount. This electronic part is classified as Fanout Buffer (Distribution), Multiplexer. Setting the temperature to -40°C~85°C ensures reliable performance. This circuit clock should be able to operate on a power supply of 2.375V~3.8V volts. Its recommended mounting way is Surface Mount. The clock buffer contains 20 pins. As a result, the output is ECL, PECL. This IC divider operates on 20 pins. This object belongs to the MC100LVEP14 family. A cut smart buffer of this type is contained in Clock Drivers. This is set to 3.8V for the maximum supply voltage. It is recommended to keep the supply voltage (Vsup) above 2.375V to ensure normal operation. There is a -4.5V volt supply that powers the timeing clock. A component of the 100LVEP series can be found in this electrical part. When utilizing this gadget, NECL MODE: VCC = 0V WITH VEE = -2.375V TO -3.8V can also be obtained.

MC100LVEP14DTR2 Features

20 terminations
The operating temperature of -40°C~85°C degrees
Clock Drivers subcategory

MC100LVEP14DTR2 Applications

There are a lot of ON Semiconductor MC100LVEP14DTR2 Clock Buffers & Drivers applications.

• Host bus adapter card
• High speed industry
• High-end consumer electronics
• Zero crossing detector
• Data center
• Car
• High performance communication system
• Fibre channel (FC)
• Oscilloscope and logic analyzer front ends
• High reliability telecommunication system