MC10E143FNR2 Overview

28-LCC (J-Lead) is a package containing the embedded device. Taking the total number of terminations on the chip and adding them up, we get 28. A Tape & Reel (TR) case is used to pack it. The part operates at 5V voltage. A total of 1 elements can be found on this part. It is equipped with a pin count of 28. It is recommended that the mount should be done by Surface Mount. There is an electronic component in the 10E. Its mounting method is Surface Mount. 0°C~85°C is the range of operating temperatures for the device. During operation, the voltage is within the range of 4.2V~5.7V. 10E is the series number of this electrical component. A 10E143 family can be used to search for similar parts. The following additional aspects of this section are worth noting: NECL MODE: VCC = 0V WITH VEE = -4.2V TO -5.7V. For this part, the minimum supply voltage (Vsup) should not be less than 4.2V. Ideally, the maximum supply voltage (Vsup) should not exceed 5.7V. A total of 9 bits are present on the IC chip. It runs at 900MHz.

MC10E143FNR2 Features

With 28 pins
Mounted in Surface Mount type.
Based on 10E143 family

MC10E143FNR2 Applications

There are a lot of ON Semiconductor
MC10E143FNR2 Shift Registers applications.

• Data Processors
• Pseudo Random Pattern Generator
• Pulse Extenders
• Pattern Recognizers
• Interconnectors
• Counter
• Data manipulation
• Delay Line
• Generate time delay toward digital circuits
• Parallel data