MC10E211FNR2G Overview

As far as the case type is concerned, the cut smart buffer is available in 28-LCC (J-Lead). It's?packaged?in?the?form?of?a Tape & Reel (TR). As a rule, the maximum value for normal operation is 700MHz. It contains 28 terminations. The supply voltage of 5V can be used to achieve high efficiency. The circuit clock is mounted on Surface Mount. An electronic component classified as Fanout Buffer (Distribution), Multiplexer is categorized as such. Setting the temperature to 0°C~85°C ensures reliable performance. The clock switch should operate with a voltage of 4.2V~5.7VV. It's in the way of Surface Mount. There are 28 pins on timeing clock. There is an output of ECL, PECL. In order for the timeing clock to operate, it is connected to the 28 pins. The MC10E211 family contains it. There is a cut smart buffer contained in Clock Drivers that is used for this purpose. This electronic gadget is a member of the 10E family. This value is set to 5.7V for the maximum available supply voltage (Vsup). In order to maintain normal operation, the supply voltage (Vsup) should be maintained above 4.2V. By default, output 6 is set. There is a -5.2V volt supply that powers the timeing clock. Electronic components of the 10E series are included in this package. In addition, NECL MODE: VCC = 0 WITH VEE = -4.2V TO -5.7V can be obtained when using this gadget.

MC10E211FNR2G Features

28 terminations
The operating temperature of 0°C~85°C degrees
Clock Drivers subcategory

MC10E211FNR2G Applications

There are a lot of ON Semiconductor MC10E211FNR2G Clock Buffers & Drivers applications.

• DDR4 JEDEC standard RDIMM design
• Mass storage system
• OTN
• High reliability telecommunication system
• Measurement test
• Line receiver and signal recovery
• Clock signal duplication
• Dual core processor workstations and servers
• Defense and aerospace equipment
• Other PCIe Gen2 networking applications