MC10EP11DTR2 Overview

There is a case available for the cut smart buffer in 8-TSSOP, 8-MSOP (0.118, 3.00mm Width). In case Tape & Reel (TR), the cut smart buffer is available. It is normal to operate with a value of 3GHz. It has 8 terminations. The supply voltage of 3.3V can be used to achieve high efficiency. As you can see, it is mounted by Surface Mount. Fanout Buffer (Distribution)?is?the?classification?for?this?electrical?component. It is recommended to set the temperature to -40°C~85°C in order to achieve reliable performance. The clock switch should be able to be powered by a 3V~5.5V V source. There is a place for it in the way of Surface Mount. It has a number of pins of 8. There is an output of ECL, PECL. Operation is performed using the 8 pins. This is a member of the family of MC10EP11. This clock divider?is econtained in Clock Drivers. In this case, the maximum supply voltage (Vsup) is set to 5.5V. In order to maintain normal operation, the supply voltage (Vsup) should be maintained above 3V. By default, the output is set to 4. There is a voltage supply of -3.0/-5.5V volts for powering it. There are several electronic components in the 10EP series. As a result of utilizing this gadget, NECL MODE: VCC=0 WITH VEE = -3.0V TO -5.5V is also available.

MC10EP11DTR2 Features

8 terminations
The operating temperature of -40°C~85°C degrees
Clock Drivers subcategory

MC10EP11DTR2 Applications

There are a lot of ON Semiconductor MC10EP11DTR2 Clock Buffers & Drivers applications.

• Microserver
• High-performance workstation
• High-end consumer electronics
• Global positioning system (GPS)
• Medical imaging
• Threshold detection
• Data center
• 5G
• Cell Phone (UMTS/WCDMA/GSM)
• FPGA