MC10EP31DTR2G Overview
It is packaged in the way of 8-TSSOP, 8-MSOP (0.118, 3.00mm Width). You can find it in the Tape & Reel (TR)package. As configured, the output uses Differential. This trigger is configured to use Positive Edge. Surface Mountis occupied by this electronic component. Powered by a -3V~-5.5Vvolt supply, it operates as follows. It is at -40°C~85°C TAdegrees Celsius that the system is operating. It is an electronic flip flop with the type D-Type. FPGAs belonging to the 10EPseries contain this type of chip. In order for it to function properly, its output frequency should not exceed 3GHz. Despite external influences, it consumes 45mAof quiescent current. It has been determined that there have been 8 terminations. The 10EP31 family contains this object. Power is supplied from a voltage of 3.3V volts. Devices in the 10Efamily are electronic devices. Surface Mount mounts this electronic component. This board is designed with 8pins on it. This device has the clock edge trigger type of Positive Edge. This device is part of the FF/Latchesbase part number family. There are 1bits in this flip flop. 5.5Vis the maximum supply voltage (Vsup). The supply voltage (Vsup) should be maintained above 3V for normal operation. To achieve this superior flexibility, 1 circuits are used. Considering the reliability of this T flip flop, it is well suited for TAPE AND REEL. An electrical current of -5.2V volts is applied to it. Additionally, you may refer to the additional NECL MODE: VCC = 0V WITH VEE = -3.0V TO -5.5V of the electronic flip flop.
MC10EP31DTR2G Features
Tape & Reel (TR) package
10EP series
8 pins
1 Bits
-5.2V power supplies
MC10EP31DTR2G Applications
There are a lot of ON Semiconductor MC10EP31DTR2G Flip Flops applications.
- Latch-up performance
- Event Detectors
- Memory
- ESD performance
- EMI reduction circuitry
- Digital electronics systems
- Parallel data storage
- Pattern generators
- Load Control
- Control circuits
