MC10EP32DR2G Overview

The device is packaged in the 8-SOIC (0.154, 3.90mm Width)type. This configuration uses 8terminations. By supplying 3.3Vwith a voltage of 3.3V , the device can be operated in a completely flexible manner. All component pins are equal to 8. There is a package in the form of Tape & Reel (TR). As part of the circuit, there are 8pins that connect other components. The Surface Mountway is used to mount it. In this case, it belongs to the family of [0]. Due to the fact that it is a member of the 10EPseries, it has a wide range of applications. Logic type Divide-by-2 is adopted. Ideally, the operating temperature should be set to -40°C~85°C. This device is mounted in the Surface Mountposition. As long as the supply voltage is set to [0], the device can operate with a greater degree of reliability. Based on the Pbfree code, the result may be yes. It is important to note that NECL MODE: VCC = 0V WITH VEE = -3V TO -5.5Vare really important features of this electronic device. Further related parts may be found under the base part number 10EP32. From the voltage source, there is a voltage of -5.2V volts. As low as 3V Vsup is the minimum supply voltage. It is possible to provide a voltage up to 5.5V (Vsup). The device has a configuration of 1 data/clock inputs. It is reported that the system has produced 1outputs.

MC10EP32DR2G Features

Embedded in the 8-SOIC (0.154, 3.90mm Width) package
NECL MODE: VCC = 0V WITH VEE = -3V TO -5.5V

MC10EP32DR2G Applications

There are a lot of ON Semiconductor
MC10EP32DR2G Counters & Dividers applications.

• Analog multiplexing and demultiplexing
• Digital multiplexing and demultiplexing
• Signal gating
• Frequency dividing circuits
• Time delay circuits
• Communications Digital Frequency Synthesizers;
• VHF, UHF, FM, AM, etc.
• Fixed or Programmable Frequency Division
• Time Out Timer for Consumer-Application Industrial Controls
• Timing applications