14 Terminals 7V~40V 14-Pin MC33060A DC to DC converter ICSWITCHING CONTROLLER 1 Outputs 25kHz Transistor Driver
SOT-23
MC33060AD Datasheet
non-compliant
In-Stock: 0 items
Specifications
Name
Value
Type
Parameter
Mount
Surface Mount
Mounting Type
Surface Mount
Package / Case
14-SOIC (0.154, 3.90mm Width)
Number of Pins
14
Operating Temperature
-40°C~85°C TA
Packaging
Tube
Published
2006
JESD-609 Code
e0
Part Status
Obsolete
Moisture Sensitivity Level (MSL)
1 (Unlimited)
Number of Terminations
14
ECCN Code
EAR99
Terminal Finish
Tin/Lead (Sn/Pb)
Subcategory
Switching Regulator or Controllers
Technology
BIPOLAR
Terminal Position
DUAL
Terminal Form
GULL WING
Peak Reflow Temperature (Cel)
240
Time@Peak Reflow Temperature-Max (s)
30
Base Part Number
MC33060A
Function
Step-Up/Step-Down
Number of Outputs
1
Output Voltage
30V
Output Type
Transistor Driver
Operating Supply Voltage
15V
Input Voltage-Nom
15V
Analog IC - Other Type
SWITCHING CONTROLLER
Output Configuration
Positive or Negative, Isolation Capable
Output Current
200mA
Voltage - Supply (Vcc/Vdd)
7V~40V
Input Voltage (Min)
7V
Topology
Flyback
Control Mode
VOLTAGE-MODE
Frequency - Switching
25kHz
Input Voltage (Max)
40V
Control Technique
PULSE WIDTH MODULATION
Rise Time
100ns
Synchronous Rectifier
No
Fall Time (Typ)
40 ns
Switcher Configuration
SINGLE
Max Frequency
200kHz
Max Duty Cycle
96 %
Length
8.65mm
Width
3.9mm
RoHS Status
Non-RoHS Compliant
Lead Free
Contains Lead
MC33060AD Product Details
MC33060AD Overview
In the 14-SOIC (0.154, 3.90mm Width) package, the switching controller meets most application requirements. There is sufficient capacity to generate switching controller for outputs 1. Packaged in solid enclosures, this pmic has a Tube rating. A total of Transistor Driver dc switching's outputs can be handled by it. This dc control has a supply voltage and operating voltage of 7V~40V. Work well in dc switchers with a -40°C~85°C TA. The switching controller can be switched at 25kHz. The Surface Mount makes it ideal for general dc dc regulator. Switch converters are connected to ICs with SWITCHING CONTROLLER analog outputs. There are a DUAL terminal on the switching converters. Various 14 terminations. Some of the control techniques adapted by these dc dc converter ics include PULSE WIDTH MODULATION. 15V nominal DC switcher's voltage input. MC33060A can be used to locate other relevant dc to dc converter ics. In total, switching converter has 14 pins. Specifically, switching converter falls under the Switching Regulator or Controllers category. dc dc voltage regulators should have a minimum input voltage of 7V. The test statistics indicate that DC regulator outputs a voltage of 30V. It should be noted that the dc to dc regulator only accepts 40V voltage as input voltage. If you start a project, note down the dc dc regulator's usual output current of 200mA. voltage regulator dc to dcs with a 96 % duty cycle are designed to be reliable when powered on and powered off. Having a Surface Mount makes DC switcher ideal for most prototype and application designs. It is estimated that this dc regulatorhas a maximum frequency of 200kHz. Users should apply 15V to operate the voltage regulator dc to dc safely and reliably.