MC33204DR2 Overview

There is a 14-SOIC (0.154, 3.90mm Width) case package that contains the instrumentation amplifiers. This is a General Purpose type op amp. The case in which buffer amplifier is delivered is called a Cut Tape (CT) case. The number of terminations is approaching the 14 mark. In this case, there are 14 pins on the board. As a reminder, this buffer op amp should be powered by 5V battery and that the battery should be inserted in the amplifier. It should be noted that this type of buffer amplifier is exactly what is known as a Operational Amplifier device. 14 pins are located on the operational amplifiers. With regard to input offset voltage, instrumentation amplifier is rated at 10mV. This electronic part is best mounted with type Surface Mount. In terms of operating temperatures, this buffer amplifier works very well at a temperature of around -40°C~105°C . In order for this instrumentation amplifier to operate, the supply current needs to be between 900μA and 10 . There should be no change in the voltage gain at 109.54dB. There are more than a few advantages to using this instrumentation amplifier, one of which is that it outputs Rail-to-Rail signals. Depending on the chip's operating supply voltage, op amp ic has a rated voltage of 4. The operating supply voltage of instrumentation amplifier is rated 6V voltage. For the packing of the instrumentation amplifier, TAPE AND REEL is adopted.

MC33204DR2 Features

14 Pins
supply voltage of 5V
109.54dB voltage gain
Output Type: Rail-to-Rail

MC33204DR2 Applications

There are a lot of ON Semiconductor MC33204DR2 Instrumentational OP Amps applications.

• Signal operation
• Test and measurement instruments
• Displayers for aircraft and air transportation control systems
• Thermocouples
• Signal transformation
• earphone
• Differentiator circuits
• Vehicle electronics
• Television
• Weak signal detection