MC74AC374DWR2G Overview

The flip flop is packaged in 20-SOIC (0.295, 7.50mm Width). Package Tape & Reel (TR)embeds it. There is a Tri-State, Non-Invertedoutput configured with it. This trigger is configured to use Positive Edge. Surface Mountis in the way of this electric part. A supply voltage of 2V~6V is required for operation. The operating temperature is -40°C~85°C TA. D-Typedescribes this flip flop. JK flip flop is a part of the 74ACseries of FPGAs. It should not exceed 155MHzin its output frequency. D latch consists of 1 elements. As a result, it consumes 8μA of quiescent current without being affected by external factors. A total of 20terminations have been recorded. This D latch belongs to the family of 74AC374. A voltage of 5V is used to power it. This T flip flop has a capacitance of 4.5pF farads at the input. It is a member of the ACfamily of D flip flop. Surface Mount mounts this electronic component. With its 20pins, it is designed to work with most electronic flip flops. Its clock edge trigger type is Positive Edge. The part is included in FF/Latches. Flip flops designed with 8bits are used in this part. Vsup reaches its maximum value at 6V. Keeping the supply voltage (Vsup) above 2V is necessary for normal operation. Despite its superior flexibility, it relies on 8 circuits to achieve it. Due to its reliability, this T flip flop is well suited for TAPE AND REEL. The D flip flop is embedded with 2ports. If high efficiency is to be achieved, the supply voltage should be maintained at 5V. There are no output lines on the JK flip flop.

MC74AC374DWR2G Features

Tape & Reel (TR) package
74AC series
20 pins
8 Bits

MC74AC374DWR2G Applications

There are a lot of ON Semiconductor MC74AC374DWR2G Flip Flops applications.

• Supports Live Insertion
• Automotive
• Functionally equivalent to the MC10/100EL29
• Bounce elimination switch
• Storage Registers
• Shift Registers
• Buffer registers
• High Performance Logic for test systems
• Instrumentation
• Test & Measurement