MC74ACT574DTR2G Overview

As a result, it is packaged as 20-TSSOP (0.173, 4.40mm Width). As part of the package Tape & Reel (TR), it is embedded. This output is configured with Tri-State, Non-Inverted. The trigger configured with it uses Positive Edge. Surface Mountis positioned in the way of this electronic part. A voltage of 4.5V~5.5Vis required for its operation. It is operating at -40°C~85°C TA. There is D-Type type of electronic flip flop associated with this device. In this case, it is a type of FPGA belonging to the 74ACT series. A frequency of 100MHzshould not be exceeded by its output. A total of 1 elements are present. This process consumes 8μA quiescents. There are 20 terminations, which are the practice of ending a transmission line with a device that matches the characteristic impedance of the line. If you search by 74ACT574, you will find similar parts. It is powered by a voltage of 5V . This T flip flop has a capacitance of 4.5pF farads at the input. In this case, the D flip flop belongs to the ACTfamily. This electronic part is mounted in the way of Surface Mount. This board has 20 pins. A Positive Edgeclock edge trigger is used in this device. The part is included in FF/Latches. This flip flop is designed with 8 Bits. Despite its superior flexibility, it relies on 8 circuits to achieve it. As a result of its reliable performance, this T flip flop is suitable for TAPE AND REEL. A total of 5V power supplies are needed to run it. This flip flop has a total of 2ports. If high efficiency is to be achieved, the supply voltage should be maintained at 5V. It is designed with 3 output lines.

MC74ACT574DTR2G Features

Tape & Reel (TR) package
74ACT series
20 pins
8 Bits
5V power supplies

MC74ACT574DTR2G Applications

There are a lot of ON Semiconductor MC74ACT574DTR2G Flip Flops applications.

• Computers
• EMI reduction circuitry
• Clock pulse
• Common Clocks
• Circuit Design
• Differential Individual
• Balanced Propagation Delays
• Bus hold
• Automotive
• Supports Live Insertion