MC74HC390ADTR2G Overview

The device is packaged in the 16-TSSOP (0.173, 4.40mm Width)type. This configuration uses 16terminations. By supplying 5Vwith a voltage of 5V , the device can be operated in a completely flexible manner. All component pins are equal to 16. There is a package in the form of Tape & Reel (TR). As part of the circuit, there are 16pins that connect other components. The Surface Mountway is used to mount it. In this case, it belongs to the family of [0]. Due to the fact that it is a member of the 74HCseries, it has a wide range of applications. Logic type Counter, Decade is adopted. Ideally, the operating temperature should be set to -55°C~125°C. This device is mounted in the Surface Mountposition. As long as the supply voltage is set to [0], the device can operate with a greater degree of reliability. An array consists of 4bits for each element. Based on the Pbfree code, the result may be yes. It is important to note that ONE FUNCTION HAS 1 BITare really important features of this electronic device. Further related parts may be found under the base part number 74HC390. For its packaging, TAPE AND REELis employed. As low as 2V Vsup is the minimum supply voltage. It is possible to provide a voltage up to 6V (Vsup). There are 2 input lines that allow binary data to be input in the form of an on/off signal.

MC74HC390ADTR2G Features

Embedded in the 16-TSSOP (0.173, 4.40mm Width) package
4 bits per element
ONE FUNCTION HAS 1 BIT

MC74HC390ADTR2G Applications

There are a lot of ON Semiconductor
MC74HC390ADTR2G Counters & Dividers applications.

• Analog multiplexing and demultiplexing
• Digital multiplexing and demultiplexing
• Signal gating
• Frequency dividing circuits
• Time delay circuits
• Communications Digital Frequency Synthesizers;
• VHF, UHF, FM, AM, etc.
• Fixed or Programmable Frequency Division
• Time Out Timer for Consumer-Application Industrial Controls
• Timing applications