MC74HC4052ADR2G Overview

Presented in 16-SOIC (0.154, 3.90mm Width), this electrical component is convenient for overseas shipping. Advanced packaging method Tape & Reel (TR) is used to provide high reliability. This analog switch is mounted in Surface Mount. 4:1 is the number of circuits in the multiplexer and demultiplexer. Around -55°C~125°C TA is the extended operating temperature. There are 16 terminations totally. High-quality output is provided by the electronic component's 4 channels. If the voltage supply is 4.5V volts, the electrical component should be turned on and run. An electrical component like this is included in the 16 series. A SP4T switching circuit is used to build these analog multiplexers. This multiplexer is composed of 2 circuits. Look for analog switch ic variants by searching with MC74HC4052A. Analog switches have 190Ohm internal resistance. For functions related to 16 pins, please refer to the datasheets. The analogue multiplexer in this example is a typical Multiplexer or Switches. A voltage higher than 6V should not normally be supplied to the switches. The analog switch ic is of the Dual, Single supply type and is cost-effective. 2V should be the lowest voltage fed to the electronic component. The analogue multiplexer could operate on 40μA current. If put voltage greater than 6V on the multiplexer, damage may be caused to the device. If you are using a dual power supply, you should attach at least 1V. There is an integrated analog IC DIFFERENTIAL MULTIPLEXER in the module. A 8 input needs to be operated. The data can be transferred over a wide range of bandwidths, called 95MHz bandwidths.

MC74HC4052ADR2G Features

4 Channels
Switch Circuit: SP4T
40μA Supply Current
Bandwidth: 95MHz

MC74HC4052ADR2G Applications

There are a lot of ON Semiconductor MC74HC4052ADR2G Analog Switches & Multiplexers ICs applications.

• HDTV
• SONET/SDH ADM
• Precision test equipment
• SDH
• Cellular phones
• Audio/video switches
• Switching Systems
• Low-Voltage
• ATM
• Multiplexers