MC74HC595ADG Overview

This device can be found embedded within the package 16-SOIC (0.154, 3.90mm Width). 16 is the sum of the number of terminations in the chip. Presented in a case of Tube. A voltage of 3V is specified for the part's operating supply. 16 pins are located on the device. It is recommended to mount by Surface Mount. It is a component of the HC/UH. There is a component mounted in the way of Surface Mount on this board. It is important to note that the operating temperature range is -55°C~125°C. The voltage supplied to it is within the range of 2V~6V. This electrical component belongs to the 74HC series. Similar parts can be found by searching for the 74HC595 family. This part should have a minimum supply voltage (Vsup) of at least 2V. A device capable of delivering voltage at 2/6V can be used. This part should not have a supply voltage (Vsup) greater than 6V. The number of output lines to be operated is 3. It runs on a quiescent current of 4μA. This device has 1 circuits. The device runs at 35MHz. A 9 output is present on the part.

MC74HC595ADG Features

With 16 pins
Mounted in Surface Mount type.
Based on 74HC595 family
It supplies 2/6V power
With 3 output lines
Quiescent Current at 4μA

MC74HC595ADG Applications

There are a lot of ON Semiconductor MC74HC595ADG Shift Registers applications.

• ROM Chips
• Parallel data
• Counter
• Generate time delay toward digital circuits
• Pseudo Random Pattern Generator
• LED matrix control
• Pulse Extenders
• Remote control holding register
• Dual-rank shift, hold, and bus applications
• Output expansion