MC74HCT273ADWR2 Overview
The flip flop is packaged in 20-SOIC (0.295, 7.50mm Width). Package Tape & Reel (TR)embeds it. This output is configured with Non-Inverted. It is configured with a trigger that uses a value of Positive Edge. In this case, the electronic component is mounted in the way of Surface Mount. The supply voltage is set to 4.5V~5.5V. A temperature of -55°C~125°C TAis used in the operation. It is an electronic flip flop with the type D-Type. In this case, it is a type of FPGA belonging to the 74HCT series. It should not exceed 30MHzin its output frequency. D latch consists of 1 elements. There is 4μA quiescent consumption. The number of terminations is 20. If you search by 74HCT273, you will find similar parts. It is powered from a supply voltage of 5V. Electronic devices of this type belong to the HCTfamily. There is an electronic part that is mounted in the way of Surface Mount. This board has 20 pins. A Positive Edgeclock edge trigger is used in this device. This device is part of the FF/Latchesbase part number family. This flip flop is designed with 8 Bits. In this case, the maximum supply voltage (Vsup) reaches 5.5V. Normal operation requires a supply voltage (Vsup) above 4.5V. In order to achieve its superior flexibility, 8 circuits are used. Considering the reliability of this T flip flop, it is well suited for TAPE AND REEL. It runs on 5Vvolts of power.
MC74HCT273ADWR2 Features
Tape & Reel (TR) package
74HCT series
20 pins
8 Bits
5V power supplies
MC74HCT273ADWR2 Applications
There are a lot of ON Semiconductor MC74HCT273ADWR2 Flip Flops applications.
- Memory
- Buffered Clock
- Latch-up performance
- Memory
- CMOS Process
- Event Detectors
- Data storage
- Storage registers
- Convert a momentary switch to a toggle switch
- Shift registers
