Name: MC74HCT374ANG
Brand: ON Semiconductor
SKU: MC74HCT374ANG
Availability: InStock

Technical Specifications

Parameter Name	Value
Type	Parameter
Mount	Through Hole
Mounting Type	Through Hole
Package / Case	20-DIP (0.300, 7.62mm)
Number of Pins	20
Operating Temperature	-55°C~125°C TA
Packaging	Tube
Published	2005
Series	74HCT
JESD-609 Code	e3
Pbfree Code	yes
Part Status	Obsolete
Moisture Sensitivity Level (MSL)	1 (Unlimited)
Number of Terminations	20
Type	D-Type
Terminal Finish	Tin (Sn)
Subcategory	FF/Latches
Technology	CMOS
Voltage - Supply	4.5V~5.5V
Terminal Position	DUAL
Peak Reflow Temperature (Cel)	260
Supply Voltage	5V
Terminal Pitch	2.54mm
[email protected] Reflow Temperature-Max (s)	40
Base Part Number	74HCT374
Function	Standard
Output Type	Tri-State, Non-Inverted
Operating Supply Voltage	5V
Number of Elements	1
Polarity	Non-Inverting
Power Supplies	5V
Number of Circuits	8
Load Capacitance	50pF
Number of Ports	2
Power Dissipation	40W
Output Current	6mA
Number of Bits	8
Clock Frequency	30MHz
Propagation Delay	47 ns
Turn On Delay Time	31 ns
Family	HCT
Logic Function	D-Type, Flip-Flop
Current - Quiescent (Iq)	4μA
Current - Output High, Low	6mA 6mA
Collector Emitter Breakdown Voltage	-80V
Max I(ol)	0.006 A
Max Propagation Delay @ V, Max CL	31ns @ 5V, 50pF
Trigger Type	Positive Edge
Input Capacitance	10pF
Number of Output Lines	3
Clock Edge Trigger Type	Positive Edge
Height Seated (Max)	4.57mm
Width	7.62mm
Radiation Hardening	No
RoHS Status	RoHS Compliant
Lead Free	Lead Free

MC74HCT374ANG Product Details

MC74HCT374ANG Overview

It is packaged in the way of 20-DIP (0.300, 7.62mm). A package named Tubeincludes it. The output it is configured with uses Tri-State, Non-Inverted. There is a trigger configured with Positive Edge. There is an electrical part that is mounted in the way of Through Hole. A supply voltage of 4.5V~5.5V is required for operation. -55°C~125°C TAis the operating temperature. D-Typeis the type of this D latch. JK flip flop belongs to the 74HCTseries of FPGAs. There should be no greater frequency than 30MHzon its output. D latch consists of 1 elements. During its operation, it consumes 4μA quiescent energy. Currently, there are 20 terminations. JK flip flop belongs to 74HCT374 family. The power source is powered by 5V. The input capacitance of this T flip flop is 10pF farads, which is defined as the capacitance between the input terminals of an op amp with either input grounded. Electronic devices of this type belong to the HCTfamily. It is mounted in the way of Through Hole. This board is designed with 20pins on it. It has a clock edge trigger type of Positive Edge. The RS flip flops belongs to FF/Latches base part number. An electronic part with 8bits has been designed. To achieve this superior flexibility, 8 circuits are used. The system runs on a power supply of 5V watts. There are 2 terminations, which are the practice of ending a transmission line with a device that matches the characteristic impedance of the line. For high efficiency, the supply voltage should be set to 5V. This T flip flop features a maximum design flexibility due to its output current of 6mA. It operates with 3 output lines.