MC74HCT74AD Overview

In the form of 14-SOIC (0.154, 3.90mm Width), it has been packaged. As part of the package Tube, it is embedded. T flip flop uses Differentialas the output. This trigger uses the value Positive Edge. In this case, the electronic component is mounted in the way of Surface Mount. A 4.5V~5.5Vsupply voltage is required for it to operate. It is at -55°C~125°C TAdegrees Celsius that the system is operating. It is an electronic flip flop with the type D-Type. FPGAs belonging to the 74HCTseries contain this type of chip. This D flip flop should not have a frequency greater than 30MHz. As a result, it consumes 2μA quiescent current and is not affected by external forces. Terminations are 14. If you search by 74HCT74, you will find similar parts. It is powered from a supply voltage of 5V. This JK flip flop has a 10pFfarad input capacitance. Devices in the HCTfamily are electronic devices. It is mounted by the way of Surface Mount. The electronic flip flop is designed with pins 14. In this device, the clock edge trigger type is Positive Edge. This device is part of the FF/Latchesbase part number family. In order to achieve its superior flexibility, 2 circuits are used. This D flip flop is well suited for RAIL based on its reliable performance. A total of 5V power supplies are needed to run it. If high efficiency is to be achieved, the supply voltage should be maintained at 5V. There are no output lines on the JK flip flop.

MC74HCT74AD Features

Tube package
74HCT series
14 pins
5V power supplies

MC74HCT74AD Applications

There are a lot of ON Semiconductor MC74HCT74AD Flip Flops applications.

• QML qualified product
• Data storage
• Matched Rise and Fall
• Storage Registers
• Bus hold
• Shift registers
• ESD performance
• Communications
• Dynamic threshold performance
• Balanced Propagation Delays