MC74LCX16374DT Overview

It is embeded in 48-TFSOP (0.240, 6.10mm Width) case. D flip flop is embedded in the Tube package. This output is configured with Tri-State, Non-Inverted. This trigger is configured to use Positive Edge. In this case, the electronic component is mounted in the way of Surface Mount. It operates with a supply voltage of 2V~3.6V. A temperature of -55°C~125°C TAis used in the operation. It belongs to the type D-Typeof flip flops. This type of FPGA is a part of the 74LCX series. In order for it to function properly, its output frequency should not exceed 170MHz. There are 2 elements in it. Despite external influences, it consumes 10μAof quiescent current. A total of 48terminations have been recorded. If you search by 74LCX16374, you will find similar parts. It is powered by a voltage of 2.5V . A JK flip flop with a 7pFfarad input capacitance is used here. Devices in the LVC/LCX/Zfamily are electronic devices. Electronic part Surface Mountis mounted in the way. The electronic flip flop is designed with pins 48. There is a clock edge trigger type of Positive Edgeon this device. The RS flip flops belongs to FF/Latches base part number. The supply voltage (Vsup) should be kept above 2V for normal operation. Despite its superior flexibility, it relies on 16 circuits to achieve it. Considering its reliability, this T flip flop is well suited for RAIL. The D flip flop has no ports embedded. It has 3 output lines to operate.

MC74LCX16374DT Features

Tube package
74LCX series
48 pins

MC74LCX16374DT Applications

There are a lot of ON Semiconductor MC74LCX16374DT Flip Flops applications.

• Clock pulse
• Common Clocks
• Memory
• Storage Registers
• Bus hold
• Synchronous counter
• Dynamic threshold performance
• Reduced system switching noise
• Counters
• Buffer registers