The electronic part can be shipped overseas conveniently because it is packaged in 16-TSSOP (0.173, 4.40mm Width). This high-reliability packaging method uses advanced packaging methods Tape & Reel (TR). There is an analog multiplexer mounted in position Surface Mount. The ratio between the number of multiplexer and demultiplexer circuits is 4:1. Operation at a temperature around -55°C~125°C TA. In total, there are 16 terminations. A electrical component with 1 channels is capable of high-quality output. An 3V voltage supply should allow the electrical part to be turned on and run. An injection of 16 pins is performed into the body of the electrical component. SP4T switching circuits are used in these analog switch ics. There are 2 circuits in this switch device. If you are looking for variants of the digital switch, trying search with MC74LVX4052. The internal resistance of this digital multiplexer is 55Ohm. You can find the functions of the 16 pins in the datasheets. It is a typical Multiplexer or Switches analog multiplexer. Users shouldn't supply more than 6V voltage to the switch device. The digital multiplexer has a low cost Single supply. It is recommended to use 2.5V as the lowest voltage for the electrical part. For this multiplexer to operate, 40μA current would be sufficient. For this switch, a dual supply voltage is feasible, but it must not exceed 3VIf you are using dual power supplies, you should attach at least 1.25V. There is an analog IC DIFFERENTIAL MULTIPLEXER integrated with this board. Operating 8 inputs is required. The transfer of data can be performed over 80MHz bandwidths.
MC74LVX4052DTR2 Features
1 Channels Switch Circuit: SP4T 40μA Supply Current Bandwidth: 80MHz
MC74LVX4052DTR2 Applications
There are a lot of ON Semiconductor MC74LVX4052DTR2 Analog Switches & Multiplexers ICs applications.