MC74LVX8051DTG Overview

Packed in 16-TSSOP (0.173, 4.40mm Width), the electronic component is convenient for shipping overseas. This packaging method provides high reliability because it uses advanced packaging techniques. Surface Mount is where this multiplexer is located. 8:1 is the ratio between multiplexers and demultiplexers. Temperatures around -55°C~85°C TA are extended for operation. In total, 16 terminations have occurred. The electronic part provides high-quality output because it has 8 channels. In the case of a voltage supply of 3V volts, the electrical part can be powered up and run. There are 16 pins injected into the electronic part body. The circuits in this analogue multiplexer number 1. If you are looking for variants of the digital switch, trying search with MC74LVX8051. As far as internal resistance is concerned, it has 30Ohm. For functions related to 16 pins, please refer to the datasheets. The analog multiplexer shown here is a typical Multiplexer or Switches. Users shouldn't supply more than 6V voltage to the switch device. Single supply type digital switch with a low cost. It is recommended to use 2.5V as the lowest voltage for the electrical part. This multiplexer would work with 40μA current. A voltage of 2.5V~6V is required to drain this analog switch from a single voltage supply. It is possible to operate 8 inputs. In 80MHz-bandwidths, data can be transferred.

MC74LVX8051DTG Features

8 Channels
40μA Supply Current
Bandwidth: 80MHz

MC74LVX8051DTG Applications

There are a lot of ON Semiconductor MC74LVX8051DTG Analog Switches & Multiplexers ICs applications.

• CSU
• Microwave transmission systems
• Channel Banks
• Battery Powered Systems
• DSLAMs
• Wireless Local Loop
• Battery Powered Instruments
• Cable Telephony – NIU, Set-Top Box, Home Side Box
• Audio and video signal routing
• PBXs