MM74HC259M Overview

The 16-SOIC (0.154, 3.90mm Width) package contains it. Tube is the way it is packaged. In this configuration, the output is set to Standard. A D-Type, Addressable logic type is used in this electrical device. Mounting this electronic component follows the Surface Mount method. A 2V~6V voltage supply is required for operation. It operates at -40°C~85°C degrees Celsius. This FPGA is part of the 74HC series. The design of this electronic part contains 8 bits. 74HC259 is its family. Designed with 16 pins, it is compatible with a wide range of devices. A Surface Mount mounting method has been used for this electronic part. It consists of 3 input lines from which an electronic circuit can be built. Its output current of 5.2mA ensures maximum design flexibility. The binary equivalent of the input line is generated by 8 output lines. The element count is 1. 1 circuits enable it to achieve high performance. 5.2mA represents the low level output current. In the high level output current, the value is set to -5.2mA. Ideally, the temperature should not be higher than 85°C. It is recommended to operate at a temperature higher than -40°C. It is capable of providing a maximum supply voltage of 6V. In order for the machine to operate, the supply voltage must be 2V.

MM74HC259M Features

16-SOIC (0.154, 3.90mm Width) package
74HC series
8 Bits
74HC259 family
16 pins
1 elements

MM74HC259M Applications

There are a lot of ON Semiconductor MM74HC259M Latches applications.

• Relay
• Multistage ripple counting
• Up/down difference counting
• Parallel-to-Serial Data Conversion
• Double bus register system
• Automotive Cluster
• Meter applications
• Hammer Device Information
• Motor Drives
• Parallel data storage