MM74HC373WM Overview

In the 20-SOIC (0.295, 7.50mm Width) package, it is embedded. A Tube package is used to package it. Tri-State is the output configured for it. The Logic type of this electrical device is D-Type Transparent Latch. Surface Mount is used to mount this electronic part. In order for it to operate, it needs a supply voltage of 2V~6V. The temperature at which the machine is operating is -40°C~85°C. It is a type of FPGA belonging to the 74HC series. There are 8 bits in this electronic part. There are 20 terminations, which are the practice of ending a transmission line with a device that matches the characteristic impedance of the line. It is a member of the 74HC373 family. In order to function, the supply voltage should be set to 4.5V. HC/UH is the family name of this electronic device. There are 20 pins on it. A Surface Mount mounting method has been used for this electronic part. As far as ports are concerned, this device has 2 ports. The part is in the FF/Latches subcategory. It reaches 6V when the supply voltage (Vsup) reaches maximum. 2/6V power supplies are needed to operate it. A supply voltage (Vsup) greater than 2V is required. With 7.8mA, maximum design flexibility is ensured. Regardless of the input line, the binary equivalent of the input line will be generated by the 3 output lines. The current consumed by the device is 8μA volts in quiescent mode, which cannot be affected by external factors.

MM74HC373WM Features

20-SOIC (0.295, 7.50mm Width) package
74HC series
8 Bits
74HC373 family
20 pins
2/6V power supplies

MM74HC373WM Applications

There are a lot of ON Semiconductor MM74HC373WM Latches applications.

• Buffer/Storage Registers
• Shift Registers
• Automotive Body Electronics
• Automotive Cluster
• Audio and video switching
• Shift left register
• Display
• BCD counting
• Buffer Storage
• Parallel data synchronization