MM74HC4316N Overview

As the electronic part is packed in 16-DIP (0.300, 7.62mm), international shipping is convenient. This high-reliability packaging method uses advanced packaging methods Tube. Multiplexers like this are mounted in the Through Hole position. 1:1 is the number of circuits in the multiplexer and demultiplexer. The operating temperature is extended to around -40°C~85°C TA. High-quality output is provided by the electronic component's 4 channels. Circuits based on SPST - NO switching are used to construct these analog switch ics. A total of 4 circuits make up this switch device. Try searching for 74HC4316 variants of the analog switch ic. There is 70Ohm internal resistance in this digital multiplexer. For details about the functions of 16 pins, please refer to the datasheets. Multiplexers should not be powered above 6V in normal situations. An effective Dual, Single supply digital multiplexer. The lowest voltage fed to the electronic component should be 2V. The switch multiplexer may be damaged if it is exposed to voltage greater than 2μA. There's no problem with dual supply voltage for this switch device. However, it shouldn't exceed 6V. It is recommended that you attach at least 1V to your dual power supply. It is possible to operate 4 inputs. Temperatures above 85°C degrees Celsius should not be operated by the multiplexer. There are 4 outputs on the analogue multiplexer. 16-PDIP package is offered by suppliers. It can conduct in a 4-bit manner.

MM74HC4316N Features

4 Channels
Switch Circuit: SPST - NO
-3db Bandwidth: 100MHz
4-Bit

MM74HC4316N Applications

There are a lot of ON Semiconductor MM74HC4316N Analog Switches & Multiplexers ICs applications.

• ADCs such as AD7840/8, AD7870/1/2/4/5/6/8
• Battery Powered Instruments
• RGB switches
• New designs requiring multiplexer functions
• Access Concentrators
• Audio/video switches
• Digital access cross connects
• Battery-powered systems
• Battery Powered Systems
• Avionics and Military Systems