MM74HC573MTC Overview

In the 20-TSSOP (0.173, 4.40mm Width) package, it can be found as an embedded module. A package of Tube has been used. Tri-State is used for the output it is configured with. This electrical device has the logic type D-Type Transparent Latch. Electronic components are mounted using the Surface Mount method. A 2V~6V voltage supply is required for operation. A temperature of -40°C~85°C is set as the operating temperature. The 74HC series is associated with this FPGA. Electronic parts with 8 bits are designed for this application. A device such as this has 20 terminations designed. 74HC573 is the family name of it. The device is operated when the supply voltage is set to 4.5V. It is a member of the HC/UH family of electronic devices. The device has 20 pins. The electronic part is mounted in a way that corresponds to Surface Mount. In this device, there is a total of 2 ports available for use. Subcategory FF/Latches includes this part. It is possible to reach 6V when the maximum supply voltage (Vsup) has been reached. A total of 2/6V power supplies are required for it to operate. It is recommended that the supply voltage (Vsup) be greater than 2V. There are 3 input Lines, which consist of an electronic circuit connected between the ac mains and the rectifier input stage of the switching power supply. With an output current of 35mA, it is highly flexible in terms of design. Aquiescent current is consumed by 8μA without being affected by external forces.

MM74HC573MTC Features

20-TSSOP (0.173, 4.40mm Width) package
74HC series
8 Bits
74HC573 family
20 pins
2/6V power supplies

MM74HC573MTC Applications

There are a lot of ON Semiconductor MM74HC573MTC Latches applications.

• Storage
• Registers
• Shift left with parallel loading
• Instrumentation
• A/D and D/A conversion
• General-Purpose Register
• Digital bus buffer
• Multi-line decoders
• Decade counting
• Motor Drives