MM74HCT273SJ Overview

The flip flop is packaged in a case of 20-SOIC (0.209, 5.30mm Width). You can find it in the Tubepackage. Currently, the output is configured to use Non-Inverted. It is configured with a trigger that uses a value of Positive Edge. In this case, the electronic component is mounted in the way of Surface Mount. It operates with a supply voltage of 4.5V~5.5V. It is operating at -40°C~85°C TA. D-Typeis the type of this D latch. In terms of FPGAs, it belongs to the 74HCT series. You should not exceed 68MHzin the output frequency of the device. The list contains 1 elements. There is a consumption of 8μAof quiescent energy. 20terminations have occurred. The object belongs to the 74HCT273 family. It is powered by a voltage of 5V . There is 6pF input capacitance for this T flip flop. In terms of electronic devices, this device belongs to the HCTfamily of devices. In this case, the electronic component is mounted in the way of Surface Mount. The 20pins are designed into the board. The clock edge trigger type for this device is Positive Edge. The part is included in FF/Latches. It is designed with 8bits. To achieve this superior flexibility, 8 circuits are used. There are 5V power supplies attached to it. In order to ensure high efficiency, the supply voltage should remain at 5V.

MM74HCT273SJ Features

Tube package
74HCT series
20 pins
8 Bits
5V power supplies

MM74HCT273SJ Applications

There are a lot of ON Semiconductor MM74HCT273SJ Flip Flops applications.

• Matched Rise and Fall
• EMI reduction circuitry
• Differential Individual
• Single Up Count-Control Line
• Common Clocks
• Computing
• High Performance Logic for test systems
• Consumer
• Individual Asynchronous Resets
• Shift Registers