MM74HCT574WM Overview

The package is in the form of 20-SOIC (0.295, 7.50mm Width). The Tubepackage contains it. There is a Tri-State, Non-Invertedoutput configured with it. The trigger configured with it uses Positive Edge. Surface Mountis positioned in the way of this electronic part. A voltage of 4.5V~5.5Vis required for its operation. It is operating at -40°C~85°C TA. It is an electronic flip flop with the type D-Type. The 74HCTseries comprises this type of FPGA. There should be no greater frequency than 33MHzon its output. A total of 1elements are present in it. As a result, it consumes 8μA quiescent current. There are 20 terminations,If you search by 74HCT574, you will find similar parts. It is powered from a supply voltage of 5V. This T flip flop has a capacitance of 10pF farads at the input. In terms of electronic devices, this device belongs to the HCTfamily of devices. Electronic part Surface Mountis mounted in the way. Basically, it is designed with a set of 20 pins. In this device, the clock edge trigger type is Positive Edge. The part you are looking for is included in FF/Latches. It is designed with a number of bits of 8. The system runs on a power supply of 5V watts. A D flip flop with 2embedded ports is available. In order to ensure high efficiency, the supply voltage should remain at 5V. With an output current of 7.2mA, it is possible to design the device in any way you want. In order to operate, the chip has 3 output lines. Currently, there are 8 channels available.

MM74HCT574WM Features

Tube package
74HCT series
20 pins
8 Bits
5V power supplies

MM74HCT574WM Applications

There are a lot of ON Semiconductor MM74HCT574WM Flip Flops applications.

• Data Synchronizers
• Communications
• Balanced Propagation Delays
• Data storage
• Counters
• Cold spare funcion
• Circuit Design
• QML qualified product
• Bounce elimination switch
• Guaranteed simultaneous switching noise level