This clock IC is packaged using the Tape & Reel (TR) method. Embedded in the 8-TSSOP (0.173, 4.40mm Width) package is this Clock PLL. A maximum temperature of 260 can be sustained by this clock generator ic during reflowing. As you can see, it consists of 8 terminations. A voltage of 3.3V should be applied to this electronic frequency generator. A clock generator's input is called CMOS and it is designed as the input for this clock generator. It is possible to access the full performance of the electrical part by implementing 1 circuits. An upper frequency limit of 133MHz Max can be achieved with this clock-based frequency synthesizer. A Surface Mount-shaped electrical component makes it convenient to mount on a panel. The maximum voltage this clock PLL can handle is 3.6V. For safety reasons, this frequency generator's supply voltage should remain above 3V. Clock generator ic works with 3V~3.6V. By calculating the test statistics, -40°C~85°C is the appropriate ambient temperature. A Zero Delay Buffer is a classification for the electronic part in question. The clock-generating IC is a 8-bit device designed specifically for microprocessors. This part number is related to its related electronic parts. A 8 pin is available on the PLL. RF synthesizers can handle voltages up to 3.3V. As a result, it is commonly classified as a type of Clock Drivers clock PLL. There is a low timing skew at 0.25 nsmax with this RF synthesizer. There are 4 pins that are configured to enable high true output on this analog clock generator.
NB2305AI1DTR2G Features
Available in the 8-TSSOP (0.173, 4.40mm Width) Supply voltage of 3.3V Operating supply voltage of 3.3V 4 true outputs
NB2305AI1DTR2G Applications
There are a lot of ON Semiconductor NB2305AI1DTR2G Clock Generators applications.