NB2309AI1HDT Overview

This clock IC is packaged using the Tube method. 16-TSSOP (0.173, 4.40mm Width) contains this Clock PLL. In the reflowing process, this clock generator ic is able to maintain a maximum temperature of NOT SPECIFIED. There are 16 terminations found in this file. Basically, this time clock generator needs a voltage of 3.3V. Due to the Surface Mount-shape, this electronic component can be conveniently installed on the panel. There is a maximum voltage of 3.6V for this clock generator. For safety reasons, this frequency synthesizer should have a voltage supply above 3V. As soon as the PLL's operating temperature exceeds 85°C, it may cause ha85°Cards. If the ambient temperature is below -40°C, the frequency generator may not start. In particular, this clock PLL is designed to be used with microprocessors. These related electrical parts are available for the base part number NB2309A. A Clock Drivers clock generator is essentially what this device is. As a result of this digital clock generator, there is a low timing skew at 0.25 ns max. There are 8 pins that are configured to enable high true output on this analog clock generator. This electronic frequency generator is mainly used to make up PLL BASED CLOCK DRIVER logic circuits. Control signals are generated from physical input clock PLLs by STANDARD input conditioning.

NB2309AI1HDT Features

Available in the 16-TSSOP (0.173, 4.40mm Width)
Supply voltage of 3.3V
8 true outputs

NB2309AI1HDT Applications

There are a lot of ON Semiconductor NB2309AI1HDT Clock Generators applications.

• Space communucation
• Digital HDTV systems
• Microwave backhaul IF
• Clock recovery
• Line cards used in telephone exchange
• Smartphones
• Peripheral devices
• Notebooks
• Carrier synchronization in wired communication
• Satellite receivers