NB4N507ADR2 Overview

The Tape & Reel (TR) method is used for packaging clock ICs. In the 16-SOIC (0.154, 3.90mm Width) package, there is an embedded clock generator. This clock generator ic can sustain 240 degrees of temperature during reflowing. It contains a total of 16 terminations within RF synthesizer. For this clock generator ic, a voltage of 3.3V is required. It is designed that the Clock PLL's input should be Clock, Crystal. It is possible to access the full performance of the electrical part by implementing 1 circuits. A clock-based RF synthesizer that provides a max frequency of 200MHz is available. Because of the Surface Mount, clock PLL can be easily mounted on the panel. Clock generator ic works with 3V~5.5V. Using the test statistics, we estimate that the ambient temperature should be -40°C~85°C. I would like to present to you a frequency synthesizer that is compatible with PECL logic levels. An electrical part such as this one can be classified as a Clock/Frequency Synthesizer component. The clock-generating IC is a 16-bit device designed specifically for microprocessors. This part number NB4N507A is related to the following electrical components. The clock PLL has 16 pins that are available. The maximum supply voltage that clock generator can handle is 5V. And basically, this clock generator is often classified as a kind of Clock Generators. The thermal destruction of an element may be caused by a supply current exceeding 35mA.

NB4N507ADR2 Features

Available in the 16-SOIC (0.154, 3.90mm Width)
Supply voltage of 3.3V
Operating supply voltage of 5V

NB4N507ADR2 Applications

There are a lot of ON Semiconductor NB4N507ADR2 Clock Generators applications.

• Radiotelephones
• Frequency synthesis
• Signal modulation and demodulation
• Threshold extension
• Reference signals to RF systems
• GPS systems
• Automatic control system test
• Automatic control
• Electronic equipment
• Vector network analyzers (VNA)