NC7SZ19FHX Overview

In order to save board space, digital switch is located in the 6-UFDFN.It is packaged in the way of Tape & Reel (TR).The mounting method digital switch ic uses is Surface Mount.For the analog part of the multiplexers, an IC Decoder/Demultiplexer is used.The operating temperature of -40°C~85°C will not be susceptible to external factors.Designers have greater flexibility using digital controlled switch when it works with 1.65V~5.5V voltage.In addition to being a member of the 7SZ series, these multiplexers have a wide range of applications.There is a design for terminating 6 as part of its basic configuration.There is a base part number 7SZ19 that can be used to locate signal switch's related components as well.In this case, 1.8V is the voltage supplied to the multiplexer's system.NO LEAD is used as the point at which the conductors come to an end as part of this formula.Single is used as its supply type.This multiplexer ic is configured with 6 pins.As you can see, it is mounted in the direction of Surface Mount.The logic switch is a member of the LVC/LCX/Z family.Vsup (maximum supply voltage) should be kept as 5.5V to prevent unnecessary failures.For mux switch's normal operation, power supply 3.3V is provided.The part belongs to the Decoder/Drivers category of signal switches.The switches package is packaged in a way which is consistent with TAPE AND REEL.It is possible to accept voltage levels by using one of the 2 input lines of multiplexers.

NC7SZ19FHX Features

Supplied in the 6-UFDFN package
Adopting a supply type of Single
Power supplies of 3.3V
2 input lines

NC7SZ19FHX Applications

There are a lot of ON Semiconductor NC7SZ19FHX Signal Switches / Multiplexers / Decoders applications.

• VGA
• Analog to digital conversion
• Enabling block of memory depending on address in memory chips
• Data-routing applications
• Decimal decoder
• Code converters
• Robotic vehicles
• Speed synchronization of multiple motors in industries
• Electronic circuits
• Microprocessor memory systems