The 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) package is used for saving board space. A LED driver using this design has 1 outputs.Mounting is done according to the Surface Mount method.As a result, it appears as a AC DC Offline Switcher with a high efficiency and a high degree of reliability.The LED driver has the capability of operating at a temperature of -40°C~125°C TA.The system operates on the basis of the frequency 65kHz.A termination of 8 is used to operate the LED driver.With 8 pins at the base, this LED driver has a base configuration.If the voltage supply is lower than 8.8V, undetermined failures may occur.There are estimated to be 1 segments.The mount is in the way of Surface Mount.Under the base part number NCL30083, you'll find this LED driver.The voltage of 28V can be supplied.In this device, there are 8 pins.Additionally, it can be classified as Display Drivers based on its characteristics.When the maximum supply current is less than 1.2mA, the device is able to provide a high level of efficiency.In order to power systems, 9.4V voltage is needed.The output voltage is 2.65V.
NCL30083BDMR2G Features
Available in the 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) package Operating temperature of -40°C~125°C TA Frequency of 65kHz Supply voltage of 12V Operating with the supply voltage of 9.4V Output voltage of 2.65V
NCL30083BDMR2G Applications
There are a lot of ON Semiconductor NCL30083BDMR2G LED Driver ICs applications.
A- lamps
Down lights
General lighting
White LED Backlight for portable equipment
Street lighting
General LED Lighting: Down-lights, Base-lights, Ceiling Lights, Exterior Lights
Sports Facility Lighting
Architectural lighting
Power source for accessories such as car audios, car navigation systems, and ETC systems