NCP1082DER2G Overview

The package Tape & Reel (TR) includes it as part of PoE controller.Packaged in the manner of 20-TSSOP (0.173, 4.40mm Width) Exposed Pad.An PoE controller of this type is Controller (PD), DC/DC.There is an increase in the number of channels strong/weak as follows: 1.In order to ensure PoE reliability, it is designed to operate at a temperature of -40°C~85°C.There is a voltage of 0V~57V that is used for the supply voltage of this electrical Po E controller.There is a possibility of determining its Po E controllers by referring to the base part number NCP1082.A 20 termination corresponds to the practice of terminating a transmission line with an impedance-matching power over ethernet controller.It is capable of producing 13W Watts of power at its maximum.There are 20 pins on it.It is included in Switching Regulator or Controllers.There are 20 pins on the board that are designed for it.This electrical PoE power over ethernet controller has a maximal switching frequency of 500kHz, and that is its maximum switching frequency.There is a maximum input voltage of 57V for this electrical power over ethernet PoE controller.It is also characterized by ALSO OPERATES AS LDO REGULATOR.In this case, 9V is the output voltage of the power over ethernet controller.

NCP1082DER2G Features

Tape & Reel (TR) package
20 pin count
20 pins

NCP1082DER2G Applications

There are a lot of ON Semiconductor NCP1082DER2G Power Over Ethernet (PoE) Controllers applications.

• Higher Power Ethernet Powered Devices
• IP Phone Power Management
• IEEE 802.3af Compliant PoE Powered Devices
• Midspan Applications
• Dual Signature PD/Forced UPOE
• Routers
• Single-Port PSE End-Point Applications
• POS Terminals
• VoIP Phones
• Switches