NCP1583DR2G Overview

It comes in a 8-SOIC (0.154, 3.90mm Width) package, so switching controller can be used for most applications. 1 outputs are supported by the dc motor controller. PMIC packaging is solid with a Tape & Reel (TR) enclosure. With Transistor Driver dc switching's output (s), it is able to handle it. The supply and operating voltage of the dc control are 4.5V~13.2V. Worked in an dc switcher with a -40°C~85°C TA rating. The switching controller can be switched at 300kHz. The Surface Mount value makes it suitable for general dc dc regulator. In order to control switching efficiently, the dcdc regulator features Enable, Phase Control. An analog IC SWITCHING CONTROLLER is connected to the switch converters. DUAL are the position of the terminal of the switching converters. 8 terminations with various dc switching's functions. These dc dc converter ics adapt several control methods, including PULSE WIDTH MODULATION. 12V nominal DC switcher's voltage input. Other relevant dc to dc converter ics will be returned if you search "NCP1583". In total, switching converter has 8 pins. In particular, switching converter is a type of Switching Regulator or Controllers. Input voltage of dc dc voltage regulator should be 4.5V. A 800mV voltage of DC regulator was detected in the test statistics. A starting point for a project is to note down the dc dc regulator's usual output current, which is 700mA. The maximum duty cycle of this voltage regulator dc to dc is set to 80 % to ensure reliability during power-up and power-down. 325kHz is the maximum frequency of this dc regulators. If the user wishes to run the voltage regulator dc to dc in a circuit safely and reliably, they should apply 12V.

NCP1583DR2G Features

Transistor Driver Outputs
Switching Frequency: 300kHz
Enable, Phase Control
PULSE WIDTH MODULATION
Max Duty Cycle: 80 %

NCP1583DR2G Applications

There are a lot of ON Semiconductor NCP1583DR2G DC to DC converter applications.

• USB circuits
• Sensitive electronic devices
• Wind power
• Product testing
• Arc suppression circuits
• Digital precision reference circuits
• Linear guide
• Adjustable voltage or current linear circuits
• Sink circuits
• Imported equipment