NCP300LSN185T1G Overview

There are 5 terminals connected to this power management, which makes it easy to mount. Packaging is in the form of a Tape & Reel (TR). For your reference, this IC power includes a list of 1 functions. There are 1 channels on this power managment ic that can be found in a series. For your reference, this PMIC includes a list of SOT-23-5 Thin, TSOT-23-5 functions. There are many benefits that this IC power shares with other Simple Reset/Power-On Reset products as well. In order to ensure a good reflow performance, the package peak reflow temperature must be set at 260. A supply voltage of 1.5V is used to conduct the PMIC chip. In a 1 supply voltage, the PMIC chip conducts. Surface Mount is the one that mounts power management. The power management system can be categorized as a Power Management Circuits chip. It has a total of 5 pins that are attached to IC management. 5 pins make up the power management. Normally, the supply voltage (Vsup) for this PMIC should not be lower than 800mV. During this IC power, the maximum supply voltage (Vsup) should not exceed 10V volts. Power management recommends the Surface Mount mounting type. It is recommended that the supervisor be set to this temperature: -40°C~125°C TA. The output voltage of this power managment ic during operation is Push-Pull, Totem Pole. There is a 500nA supply current present in the power management. It is always advisable to use NCP300, the base supervisor number, when searching for similar PMICs from the manufacturer.

NCP300LSN185T1G Features

Simple Reset/Power-On Reset type
Minimum supply voltage of 800mV
500nA operating supply current

NCP300LSN185T1G Applications

There are a lot of ON Semiconductor NCP300LSN185T1G Voltage Supervisors applications.

• Unattended substation automation
• Medical-specific isolation transformer
• Multi-voltage system
• Important electronics for automotive safety
• Microprocessor system
• Telecommunications equipment
• Network equipment
• Battery-powered equipment
• Dash board
• Utility meter